On a side note. The Mapping center does have some useful information. I really like all the Historic Map symbols they created.
Wednesday, July 30, 2008
Et Tu ESRI?
Sigh. I'm impressed to see the new effort ESRI is putting in trying to emphasize ArcGIS as a GIS that also can be used as a cartographic product. In the past, maps have seem to be an after thought. In the 1st edition of Getting to Know ArcGIS, one of the projects has the user create a series of beautiful, colorful, thematic maps...without a single legend. What good is that? So when I caught site of the recent MappingCenter Blog entry I was a little dismayed at what they are advertiseing with the photo they have up:
This is a terrible example that they are using. If I'm not mistaken, bodies of water are treated as a single elevation at the water surface (unless showing bathymetric contours), therefore showing contours cutting off at the edge of the water surface is totally inappropriate. These contours should go around the pond not through it!
On a side note. The Mapping center does have some useful information. I really like all the Historic Map symbols they created.
On a side note. The Mapping center does have some useful information. I really like all the Historic Map symbols they created.
Monday, July 21, 2008
Back
I'm back, which I'm sure is a relief to all 2 of you who read this. We were on a 5 day backpacking trip along the Jatbula trail near Katherine Northern Territory. If you're interested, here is the blog entry on it.
The camel project finished up shortly before the trip. I was a little nervous but it seemed to work out. In the least, it gives some base on which to develop a more robust decision support system for camel management. The difficulty that I ran into was because everything was tied to access (i.e. roads), most of the management plans overlapped. There were ways around it though, for example doing a cost distance surface from the abattoir limited camel regions to how close they were to the abattoir along the road. I actually used the cost distance surfaces most of the time. Instead of using point locations for say boreholes (necessary for transporting the camels because of the amount of water they require) I used those as starting locations for a cost-distance surface and the roads a friction surface. I also used the major roads as a starting place, with tracks and 4wd roads as a friction surface. This created an implicit cost (cost as in the cost of implementing a camel management action) where it was less money to implement the plan on a major road (easier access) than on a track and then of course off road was the most costly. I originally based aerial culling off of roads, but then switched that to community base, which gave a different range....It was an interesting project. Difficult due to the time constraints, though.
Finishing an article based on some school choice analysis I worked on in 2007. Hopefully it will be accepted for a special edition on mapping school choice. I used kernel density estimation to explore some of the changes in distribution across the school district. Also calculated network distances to see how distance from home to school has changed.
Working on another article using kernel density to calculate a segregation index. It is based on the methodology in this article by O'Sullivan and Wong, A Surface-Based Approach to Measuring Spatial Segregation. I'm not entirely sure if this will actually happen, but I'm experimenting a little bit.
The camel project finished up shortly before the trip. I was a little nervous but it seemed to work out. In the least, it gives some base on which to develop a more robust decision support system for camel management. The difficulty that I ran into was because everything was tied to access (i.e. roads), most of the management plans overlapped. There were ways around it though, for example doing a cost distance surface from the abattoir limited camel regions to how close they were to the abattoir along the road. I actually used the cost distance surfaces most of the time. Instead of using point locations for say boreholes (necessary for transporting the camels because of the amount of water they require) I used those as starting locations for a cost-distance surface and the roads a friction surface. I also used the major roads as a starting place, with tracks and 4wd roads as a friction surface. This created an implicit cost (cost as in the cost of implementing a camel management action) where it was less money to implement the plan on a major road (easier access) than on a track and then of course off road was the most costly. I originally based aerial culling off of roads, but then switched that to community base, which gave a different range....It was an interesting project. Difficult due to the time constraints, though.
Finishing an article based on some school choice analysis I worked on in 2007. Hopefully it will be accepted for a special edition on mapping school choice. I used kernel density estimation to explore some of the changes in distribution across the school district. Also calculated network distances to see how distance from home to school has changed.
Working on another article using kernel density to calculate a segregation index. It is based on the methodology in this article by O'Sullivan and Wong, A Surface-Based Approach to Measuring Spatial Segregation. I'm not entirely sure if this will actually happen, but I'm experimenting a little bit.
Labels:
camel,
Kernel Density,
School Choice,
Spatial Segregation
Monday, June 30, 2008
MapInfo 9.5 Update
Downloaded and installed the evaluation version. I also downloaded and installed MapCad. Workspaces are still there, so that alone is enough to turn me off. There is some handy right-click context menu functionality in the map browser. Especially for editing. The interface looks essentially the same, and I can't see if they changed anything. On the one hand this is nice, because everything looks the same and makes it easy to learn from one version to the next (can't say this about Autodesk).
I tried to use the MapCad tools but, honestly, couldn't find how to load them. I ran the installer, twice, but nothing happened. I looked in the helpfile for MapCad and it said to go to the Help dropdown and go to MapCad Help. This, of course, did not exist. So again I ask the question, why spend over a 1000$ when you can get the same functionality out of Manifold (plus both the extensions for that amount)? It will supposedly also work with MSSQL 2008 spatial as well.
I didn't bother playing with the .NET features...
I tried to use the MapCad tools but, honestly, couldn't find how to load them. I ran the installer, twice, but nothing happened. I looked in the helpfile for MapCad and it said to go to the Help dropdown and go to MapCad Help. This, of course, did not exist. So again I ask the question, why spend over a 1000$ when you can get the same functionality out of Manifold (plus both the extensions for that amount)? It will supposedly also work with MSSQL 2008 spatial as well.
I didn't bother playing with the .NET features...
Friday, June 27, 2008
MapInfo 9.5
The geoblogosphere seems to be all a twitter (no relation to twitter) with the release of ArcGIS 9.3. I made the mistake of getting my knickers in a twist when 9.2 came out. I installed it wanting to try the new features, but unfortunately I used it to work on some project work when the rest of the office hadn't upgraded from 9.1 (or 9.0 in some cases). That was dumb on my part, so now if I happen to receive a copy, I don't think I'll upgrade till SP1 comes out. Though, sometimes service packs can lead to more headaches as I found with 9.2 sp3 and the loss of some of my python tools in the toolbox...weeeeee!
Anyway, all the talk around 9.3 has overshadowed the pending release of MapInfo 9.5. Its fairly obvious from my posts that I am primarily an ESRI user, and have given a fair share of MapInfo criticism. They must have heard the call (I'm certain I wield such influence), because it sounds like they have made some substantial changes. They are a little behind the times on some things, like the .NET MapBasic features. ESRI has had that for over a year now. I'm not too impressed by having support for MSSQL, because it sounds like everyone will. Although, I bet MapInfo won't require any extra extension to handle it. I am hopeful but very much doubt that there will be direct support in ArcGIS 9.3 without the need for ArcSDE. MapInfo should also add PostGIS support in my opinion. It seems to be gaining some commercial acceptance through Manifold, ArcSDE, zigGIS (also ArcGIS), etc...
I'm downloading an evaluation copy of 9.5. I can't test everything, but I read that they designed the interface with .NET, so I'm hoping it doesn't look like crayon on sandpaper anymore. I also hope they replaced workspaces with something more functional. I'll post my findings here.
Anyway, all the talk around 9.3 has overshadowed the pending release of MapInfo 9.5. Its fairly obvious from my posts that I am primarily an ESRI user, and have given a fair share of MapInfo criticism. They must have heard the call (I'm certain I wield such influence), because it sounds like they have made some substantial changes. They are a little behind the times on some things, like the .NET MapBasic features. ESRI has had that for over a year now. I'm not too impressed by having support for MSSQL, because it sounds like everyone will. Although, I bet MapInfo won't require any extra extension to handle it. I am hopeful but very much doubt that there will be direct support in ArcGIS 9.3 without the need for ArcSDE. MapInfo should also add PostGIS support in my opinion. It seems to be gaining some commercial acceptance through Manifold, ArcSDE, zigGIS (also ArcGIS), etc...
I'm downloading an evaluation copy of 9.5. I can't test everything, but I read that they designed the interface with .NET, so I'm hoping it doesn't look like crayon on sandpaper anymore. I also hope they replaced workspaces with something more functional. I'll post my findings here.
Friday, June 20, 2008
Geography of Teeth
Was reading the recent National Geographic Article about stonehenge. They discovered a burial site of a rich neolithic man in the Salisbury plain near Stonehenge. Turns out he was originally from the Southern Alps of Europe, and apparently had migrated to that area...how I'm not sure. But they discovered this information by doing an Isotopic Tooth Analysis. I just thought that was pretty cool that they can determine geography via your teeth. Here are a few articles that might be of interets: here and here.
Wednesday, June 18, 2008
Place...Countries.
I was watching the English Patient the other night. I have to admit, I think it is one of the best movies made...Anyway, you don't search for GIS blogs to here about the writer's favorite movies. I guess I had not seen it since finishing at university, because it never struck me how geographical that movie was. Not in that it was shot in several countries, but in geographical concepts. One of the major themes of the movie is place and identity. Another related theme was with borders, country borders to be specific. I don't think that movie could have been made at any other time than the 90's. Sort of that reshuffling of the deck period between the fall of the Berlin wall and September 11th. The internet and global communication was create a borderless world. The idea of a one world government seemed to have gained momentum. So here you have this movie where the characters defy borders and create their own sense of place, only to have that destroyed by the invasion of ownership of place.
One other part struck me too, was when Juliette Binoche's character is asked if she knows anyone from a dying soldier's hometown. I think it is later in the movie that she questions this action. The desire to see someone from where you come from. This probably interested me more than normal, as I am now living abroad. We just went to a party of Americans living abroad. The only reason for the party was that we were Americans, or spouses and children of Americans. So that was the one connection - you're American. There was even a hierarchical scale to the connection - America --> State --> Close to the same town....It's just funny, because without the concept of place, it's not like we would have ever met or been friends with any of these people, especially in the states. We only had one thing in common. This happened when I traveled too. It's such an easy introduction - WHERE are you from? As if Where defines who you are. I would probably make the argument it does partly define you.
I noticed that Harm de Blij has a new book coming out this winter/summer (july), and I think it will be about this topic. From the product description:
***********************
Forgot the book came out shortly before the movie, but still in the early 90's. Although similar themes between the book and movie exist, I think the movie had a few of its own. Anyway, here are some articles on the book here and here.
One other part struck me too, was when Juliette Binoche's character is asked if she knows anyone from a dying soldier's hometown. I think it is later in the movie that she questions this action. The desire to see someone from where you come from. This probably interested me more than normal, as I am now living abroad. We just went to a party of Americans living abroad. The only reason for the party was that we were Americans, or spouses and children of Americans. So that was the one connection - you're American. There was even a hierarchical scale to the connection - America --> State --> Close to the same town....It's just funny, because without the concept of place, it's not like we would have ever met or been friends with any of these people, especially in the states. We only had one thing in common. This happened when I traveled too. It's such an easy introduction - WHERE are you from? As if Where defines who you are. I would probably make the argument it does partly define you.
I noticed that Harm de Blij has a new book coming out this winter/summer (july), and I think it will be about this topic. From the product description:
"In recent years a spate of books and articles have argued that the world today is so mobile, so interconnected and so integrated that it is, in one prominent assessment, flat. But as Harm de Blij contends in The Power of Place, geography continues to hold billions of people in an unrelenting grip. We are all born into natural and cultural environments that shape what we become, individually and collectively. From our "mother tongue" to our father's faith, from medical risks to natural hazards, where we start our journey has much to do with our destiny, and thus with our chances of overcoming the obstacles in our way."I find it to be interesting, but I can only offer anecdotal experience as my view. I also find Geography in the movies to be interesting. A recent AAG newsletter had a short article about this. I think it was just before the Boston Conference, because all the movies were about/took place in Boston.
***********************
Forgot the book came out shortly before the movie, but still in the early 90's. Although similar themes between the book and movie exist, I think the movie had a few of its own. Anyway, here are some articles on the book here and here.
Sunday, June 15, 2008
Projections!!!
There are so many great new cool projects on the web it is hard to keep up. They probably aren't even new, but I just found out about them. Here is an example. But why, with all the new innovations and ideas do people still create these maps using latitude and longitude? The Social Explorer presents this distorted lat and long thematic map, when they should really be using a projection that preserves area. I know technology like Mapserver, and Sharpmap possess the capability to project into a multitude of projections (I believe using PROJ4).
I see with Google Maps why it is necessary to use Lat and Long, because it just makes it easier for Google if people conform to a standard Latitude and Longitude. Projections or the lack there of can greatly influence people's perceptions of the world. Look at the Mercator projection and Greenland. I think this is related to Dr. Parks' talk as well. She says people don't have an understanding of satellites, but they also don't have any understanding of projections.
I can't tell if Google Earth is a culprit of this as well, because I'm not sure if it uses a Geoid or some other "true" representation of the Earth.
I see with Google Maps why it is necessary to use Lat and Long, because it just makes it easier for Google if people conform to a standard Latitude and Longitude. Projections or the lack there of can greatly influence people's perceptions of the world. Look at the Mercator projection and Greenland. I think this is related to Dr. Parks' talk as well. She says people don't have an understanding of satellites, but they also don't have any understanding of projections.
I can't tell if Google Earth is a culprit of this as well, because I'm not sure if it uses a Geoid or some other "true" representation of the Earth.
Subscribe to:
Posts (Atom)
